WHITE MINERAL (WM)
Products and components
Single Cold Feed Unit (EVD)
- Cold feed units in 12 m³, 16 m² or 20 m².
- Conveying capacities of 160, 240 and 360 t/h
- Depending on number of dosers and design of collecting conveyor
V1: Loading side in discharge direction right
V2: Loading side in discharge direction left
EVD components
Hopper
Description
WM hopper
Volumen: 12 m³
- Loading width: 3,500 mm
- Loading depth: 2,500 mm
- Loading height: 4,000 mm
(incl. foot elevation 1,100 mm)
WM hopper
Volumen: 16 m³
- Loading width: 3,800 mm
- Loading depth: 2,800 mm
- Loading height: 4,200 mm
(incl. foot elevation 1,100 mm)
WM – hopper
Volumen: 20 m³
- Loading width: 4,220 mm
- Loading depth: 3,000 mm
- Loading height: 4,300 mm
(incl. foot elevation 1,100 mm)
Equipment
- Shaker
- Support for control cabinet
- Foot elevation
- Doser in RAL
optional:
- Deflector plate
- Incursion protection
- Wear lining
Belt feeder
Description
- Conveying capacity:
max. 120 t/h - Belt width:
up to 650 mm - Axial spacing:
up to 2.40 m - Drive output:
up to 1.5 kW
Equipment
- Galvanised version
- Rubber belt with
synthetic fabric inserts
and corrugated edge - Material shortage switch
- Belt scale (for
weighing discharge conveyors) - Inductive circulation control
Collecting conveyor
Description
- Conveying capacity:
max. up to 360 t/h - Belt width:
800 mm - Axial spacing:
variable/project-related - Drive output:
variable/project-related
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Independent support
- Circulation control
- Emergency stop pull cord switch
- Independent support
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Belt scale
- Inductive circulation control
- Cover/corrugated sheet metal covers
- Wear protection at feeding and transfer points
Inclined conveyor
Description
- Conveying capacity:
max. 360 t/h - Belt width:
800 mm - Axial spacing:
variable/project-related - Drive output:
variable/project-related
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Independent support
- Circulation control
- Emergency stop pull cord switch
- Independent support for foundation or foundationless installation
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Belt scale
- Inductive circulation control
- Cover/corrugated sheet metal covers
- Wear protection at feeding and transfer points
Semi-mobile Cold Feed Unit (SVD)
The different versions of this dosing and mixing unit allow flexibility in its set-up, adapted to the local conditions (e.g. T-shape).The semi-mobile pre-dosing unit is a complete unit, consisting of a dosing group, discharge conveyors, collecting conveyor and ascending conveyor.
SVD components
Hopper unit
Description
Volume: 12 m³
Loading width: 3,500 mm
Loading depth: 2,500 mm
Loading height: 4,100 mm
- 3-unit
ready for operation
(L x W x H) in mm
16,840 x 2,500 x 4,100 - 4-unit
ready for operation
(L x W x H) in mm
20,340 x 2,500 x 4,100 - 5-unit
ready for operation
(L x W x H) in mm
23,840 x 2,500 x 4,100 - 6-unit
ready for operation
(L x W x H) in mm
27,340 x 2,500 x 4,100
Equipment
- Shaker
- Support for control cabinet
- Dosers in RAL
optional:
- Deflector plate
- Incursion protection
- Wear lining
- Approach ramp
Belt feeder
Description
- Conveying capacity:
max. 120 t/h - Belt width:
500 mm - Axial spacing:
up to 2.12 m - Drive output:
0.55 kW
Equipment
- Galvanised version
- Rubber belt with
synthetic fabric inserts
and corrugated edge - Material shortage switch
- Belt weigher (for
weighing discharge conveyors) - Inductive circulation control
Collecting conveyor
Description
- Conveying capacity:
max. 360 t/h - Drive output:
7.5 kW - Belt width:
800 mm - Axial spacing:
14,100 mm
3-unit dosing group - Axial spacing:
17,100 mm
4-unit dosing group - Axial spacing:
21,100 mm
5-unit dosing group - Axial spacing:
24,600 mm
6-unit dosing group
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Circulation control
- Emergency stop pull cord switch
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Cover/corrugated sheet metal cover
Inclined conveyor
Description
- Conveying capacity:
max. 360 t/h - Belt width:
800 mm - Axial spacing:
variable / project-related - Drive output:
variable / project-related
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Circulation control
- Emergency stop pull cord switch
- Independent support for foundation or foundationless installation
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Belt scale
- Inductive circulation control
- Cover/corrugated sheet metal covers
- Wear protection at feeding and transfer points
Mobile Cold Feed Unit (MVD)
This dosing and mixing unit can be used flexibly on all construction sites and is ready for operation in a very short time. The mobile pre-dosing unit is a complete unit consisting of a dosing group, discharge conveyors, collecting conveyor and ascending conveyor.
MVD components
Hopper unit
Description
MVD cold feed unit / trailer
Volume: 8m³
Loading width: 3,400 mm
Loading depth: 2,500 mm
Loading height: 4,000 mm
- 4-unit
ready for operation
(L x W x H) in mm
14,413 x 2,720 x 4,000
perm. total weight:
16,000 kg
- 5-unit
ready for operation
(L x W x H) in mm
17,850 x 2,720 x 4,000
perm. total weight:
22,500 kg
Equipment
- Shaker
- Support for control cabinet
- Electrically installed
- Approach ramp
- DEKRA approval
Optional:
- Deflector plate
- Incursion protection
- Wear lining
Belt feeder
Description
- Conveying capacity:
max. 120 t/h - Belt width:
up to 650 mm - Axial spacing:
up to 2.40 m - Drive output:
up to 1.5 kW
Equipment
- Galvanised version
- Rubber belt with
synthetic fabric inserts
and corrugated edge - Material shortage switch
- Belt weigher (for
weighing discharge conveyors) - Inductive circulation control
Collecting conveyor
Description
- Conveying capacity:
up to 240 t/h - Drive output:
5.5 kW - Belt width:
650 mm - Axial spacing:
14,000 mm
4-piece dosing unit
Axial spacing:
17,350 mm
5-piece dosing unit
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Circulation control
- Emergency stop pull cord switch
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Cover/corrugated sheet metal covers
- Wear protection at feeding and transfer points
Inclined conveyor
Description
- Conveying capacity:
up to 240 t/h - Axial spacing:
9,500 mm - Belt width:
650 mm - Drive output:
5.5 kW
Equipment
- Galvanised version
- Independent support
- Circulation control
- Emergency stop pull cord switch
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Cover/corrugated sheet metal covers
- Wear protection at feeding and transfer points
Container Cold Feed unit (CVD)
This dosing and mixing unit is characterised by its transportability on semitrailers and as a sea container and can therefore be quickly used worldwide. The container pre-dosing unit is a complete unit consisting of a dosing group, discharge conveyors, collecting conveyor and ascending conveyor.
CVD components
Hopper unit
Description
Volume: 10 m³
Loading width: 4,000 mm
Loading depth: 2,150 mm
Loading height: 3,507 mm
- 3-unit
ready for operation
(L x W x H) in mm
15,110 x 2,438 x 3,507 - 4-unit
ready for operation
(L x W x H) in mm
15,107 x 2,438 x 3,507
Equipment
- Shaker
- Support for control cabinet
- Electrically installed
Belt feeder
Description
- Conveying capacity:
max. 120 t/h - Belt width:
up to 650 mm - Axial spacing:
up to 2.40 m - Drive output:
up to 1.5 kW
Equipment
- Galvanised version
- Rubber belt with
plastic fabric inserts
and corrugated edge - Material shortage switch
- Belt weigher (for
weighing conveyors) - Inductive circulation control
Collecting conveyor
Description
- Conveying capacity:
max 120 t/h - Belt width:
650 mm - Axial spacing:
14,590 mm
3-piece dosing unit - Axial spacing:
14.590 mm
4-unit dosing unit - Drive output:
5.5 kW
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Circulation control
- Emergency stop pull cord switch
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Cover/corrugated sheet metal covers
- Wear protection at transfer points
Inclined conveyor
Description
- Conveying capacity:
max. 120 t/h - Belt width:
650 mm - Axial spacing:
14,000 mm - Drive output:
5.5 kW
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts
- FAF carbide lamellar scrapers
- Independent support
- Circulation control
- Emergency stop pull cord switch
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
optional:
- Cover/corrugated sheet metal covers
- Wear protection at feeding and transfer points
Conveyor technology
Components
Slinger conveyor
Description
- Conveying capacity:
max. 400 t/h - Belt width:
500 – 800 mm - Axial spacing:
variable / project-related - Drive output:
variable / project-related
Equipment
- Galvanised version
- Rubber belt with plastic fabric inserts, heat-resistant
- Outer belt cleaner (carbide) Special version
- Reservable
- Circulation control with impeller
- Hot bearing with lubrication line
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards
Centrifugal conveyor
Description
- Conveying capacity:
160 – 400 t/h - Belt width:
400 mm - Axial spacing:
1.5 m
Drive output:
2.2 kW
Equipment
- Galvanised version
- Circulation control with impeller
- Rubber belt with plastic fabric inserts, heat resistant up to 150 °C
- Emergency stop pull cord switch
- Hot bearing with lubrication line
- Outer belt cleaner (carbide) Special version
- Intervention protection in compliance with EN 620 and EC 2006/42/EU standards